To connect the pump to the discharge outlet
Clear tubing Ø 6 mm int. (1/4” ID), 5 m long.

packing : Plastic bag

To connect condensate outlet to the detector inlet
Blond rubber, 50 cm long, Ø15 mm int.

packing : 1 pc, in plastic bag

Reducers for fan coils and centrifugal pumps
1x ACC00225 (Ø25mm - 21.5 mm), 1x ACC00230 (Ø30mm - 21.5mm); 1x ACC00240 (Ø40mm - 21.5mm).

packing : 3 pièces Blister

To connect the pump to the discharge outlet
Clear tubing Ø10 mm int. (3/8” ID), 25 m long.

packing : Filmed roll

To connect the pump to the discharge outlet
Reinforced clear tubing Ø10 mm int. (3/8” ID), 25 m long.

packing : Filmed rolls

To connect the pump to the discharge outlet
Clear tubing Ø6 mm int. (1/4” ID), 50 m long

packing : Filmed roll

To connect the pump to the discharge outlet
Reinforced clear tubing Ø 6 mm int. (1/4” ID), 50 m long.

packing : Filmed roll

To reduce condensate tray / detector outlet diameter
Ø22 ext. to Ø17 ext.

packing : 1 pc, blister

To reduce condensate tray / detector outlet diameter
Ø32 ext. to Ø17 ext.

packing : 1 pc, blister

To reduce condenser / detector outlet diameter
Ø32 ext. to Ø17 ext.

packing : 1 pc, blister

To connect 2 tubes
Ø32 ext. to Ø17 ext.

packing : 1 pc, blister

For leak tight connection to the PVC drainage tube
For Ø6 mm int. (1/4”) tube.

packing : 6 pcs, blister

To connect 2 tubes
For Ø6 mm int. (1/4”) tubes. 5 no. elbows, 5 no. straight pieces.

packing : 10 pcs, blister

To connect detector inlet
Black rubber, Ø15 int. to Ø15 int

packing : 1 pc, blister

Allows the position of the detector to be lowered in relation to the condensates tank.
Black rubber, Ø15 int. to Ø15 int

packing : 1 pc, blister

To connect the detector inlet to the condensates tank
Black rubber, Ø17 int. to Ø15 int.

packing : 1 pc, blister

To connect 3 tubes
For Ø6 mm int. (1/4”) tubes.

packing : 5 pcs, blister

To aid installation of detector in mini split units
Plastic, Ø14 to Ø17 mm OR Ø15.6 to Ø17 mm

packing : 5 pcs, blister

To prevent siphoning when the discharge point is lower than the detector level
IN: for tube Ø6 mm int. (1/4”) OUT: for tube Ø10 mm int. (3/8”)

packing : 5 pcs, blister

For rigid pipe
Black rubber, Ø10 mm (3/8”) to Ø20 mm (3/4”).

packing : 1 pc, blister

To connect two different diameter pipes together
Black rubber connectors 1 x ACC00225 (Ø25 mm 1”),

packing : 1 pc, blister

Black rubber connectors 1 x ACC00225 (Ø25 mm 1”), 1 x ACC00230 (Ø32 mm 1¼”), 1 x ACC00240 (Ø40mm 1½”)
Black rubber connectors 1 x ACC00230 (Ø32 mm 1¼”)

packing : 1 pc, blister

Black rubber connectors 1 x ACC00225 (Ø25 mm 1”), 1 x ACC00230 (Ø32 mm 1¼”), 1 x ACC00240 (Ø40mm 1½”)
Black rubber connectors 1 x ACC00240 (Ø40mm 1½”)

packing : 1 pc, blister

For Ø10mm (3/8”) tube

packing : 1 pc, blister

To operate an additional alarm and switch on the pump
115 / 230 V~ - 10 A 61 x 60 x 27 mm

packing : 1 pc, blister

To increase the length between the detection unit and the pump
5 m long

packing : 1 pc, blister

To increase the length between the detection unit and the pump
5 m long

packing : 1 pc, blister

For Ø6 mm int. (1/4”) tube

packing : 5 pc, blister

For Ø6 mm int. (1/4”) tube

packing : 1 pc, blister

For tube: * IN: Ø15 mm int. * OUT: Ø6 mm int. (1/4”)

packing : 1 pc, blister