To connect the pump to the discharge outlet
Clear tubing Ø 6 mm int. (1/4” ID), 5 m long.

packing : Plastic bag

To connect condensate outlet to the detector inlet
Blond rubber, 50 cm long, Ø15 mm int.

packing : 1 pc, in plastic bag

To connect the pump to the discharge outlet
Clear tubing Ø6 mm int. (1/4” ID), 50 m long

packing : Filmed roll

To connect the pump to the discharge outlet
Reinforced clear tubing Ø 6 mm int. (1/4” ID), 50 m long.

packing : Filmed roll

To reduce condensate tray / detector outlet diameter
Ø22 ext. to Ø17 ext.

packing : 1 pc, blister

To reduce condensate tray / detector outlet diameter
Ø32 ext. to Ø17 ext.

packing : 1 pc, blister

To reduce condenser / detector outlet diameter
Ø32 ext. to Ø17 ext.

packing : 1 pc, blister

To connect 2 tubes
Ø32 ext. to Ø17 ext.

packing : 1 pc, blister

For leak tight connection to the PVC drainage tube
For Ø6 mm int. (1/4”) tube.

packing : 6 pcs, blister

To connect 2 tubes
For Ø6 mm int. (1/4”) tubes. 5 no. elbows, 5 no. straight pieces.

packing : 10 pcs, blister

To connect detector inlet
Black rubber, Ø15 int. to Ø15 int

packing : 1 pc, blister

Allows the position of the detector to be lowered in relation to the condensates tank.
Black rubber, Ø15 int. to Ø15 int

packing : 1 pc, blister

To connect the detector inlet to the condensates tank
Black rubber, Ø17 int. to Ø15 int.

packing : 1 pc, blister

To connect 3 tubes
For Ø6 mm int. (1/4”) tubes.

packing : 5 pcs, blister

To aid installation of detector in mini split units
Plastic, Ø14 to Ø17 mm OR Ø15.6 to Ø17 mm

packing : 5 pcs, blister

To prevent siphoning when the discharge point is lower than the detector level
IN: for tube Ø6 mm int. (1/4”) OUT: for tube Ø10 mm int. (3/8”)

packing : 5 pcs, blister

For Ø6 mm int. (1/4”) tube

packing : 5 pc, blister